Removing The Ring Scanner - Symbol WSS 1000 Product Reference Manual

WSS 1000 Product Reference Guide
4. Slide the ring mount and ring scanner on your right or left index and middle fingers
with the trigger next to your thumb.
Figure 5-12. Sliding Ring Mount and Scanner Onto Finger

Removing the Ring Scanner

To remove the ring scanner for use by another operator:
1. Remove the cable from the scanner's interface port by snapping the connector out to
the side.
2. Press the mount release button and gently pull/push the ring scanner out of the
mount.
Mount Release Button
Figure 5-13. Removing the Ring Scanner from the Mount
5-8