Spectrum24 Terminal - Symbol WSS 1000 Product Reference Manual

Spectrum24 Terminal

Typical initialization and operating problems and solutions for Spectrum24 terminals are
provided in Table 7-3.
Out of range
Startup process fails
Low Battery Message
Battery is dead
Terminal disassociated from
Access Point
Table 7-3. Troubleshooting Spectrum24 Terminals
Problem Explanation/Action
Terminal is out of the Access Point's range.
If you move the terminal during initialization, the
terminal may be out of range of the AP and unable
to complete the initialization process.
Move back in range and repeat the initialization
process.
Boot server type (BOOTP or DHCP) doesn't exist.
Verify that boot server is operating and able to
respond to TCP/IP BOOTP or DHCP requests from
the terminal.
Place the terminal in a cradle and recharge battery.
OR
Power terminal off and replace battery.
Battery not replaced after receiving low battery
message or terminal left on for more than 24 hours.
Recharge or replace the battery.
Application does not respond to interactive
operations.
Applications using internal batch mode continue to
function until required to transmit by radio, then fail
to work. No message displayed.
Maintaining the WSS 1000
7-7