Symbol WSS 1000 Product Reference Manual page 48

d. Select Default Router from the main configuration menu. The Default Router
screen is displayed.
To change the current Default Router setting, backspace over the current value
and type a new value, in decimal form. Each part of the four-part address must
be in the range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
e. Select Terminal IP Address from the main configuration menu. The Terminal IP
Address screen is displayed.
Figure 4-6. T erminal IP Address Screen
To change the current Terminal IP Address, backspace over the current value and
type a new value in decimal form. Each part of the four-part address must be in
the range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
DEFAULT ROUTER
Enter Default Router
157.235.93.178
BkSp, Clear, Enter
Figure 4-5. Default Router Screen
TERMINAL IP ADDRESS
Enter IP address:
157.235.93.186
BkSp, Clear, Enter
Spectrum24 RF Terminal Setup
4-7