Symbol WSS 1000 Product Reference Manual page 47

WSS 1000 Product Reference Guide
b. To change the Net Id, select Net Id from the CFG24 Menu. The Net Id screen is
displayed.
To change the current Net Id value, backspace over the current value and type a
new value, in hexadecimal format, in the range 101 to 1FE. Alphabetical hex
values can appear in upper or lower case.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
c. Select Subnet Mask from the main configuration menu. The Subnet Mask screen
is displayed.
To change the current Subnet Mask setting, backspace over the current value and
type a new value, in decimal form. Each part of the four-part address must be in
the range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
4-6
NET ID
Enter Net Id(hex):
150
BkSp, Clear, Enter
Figure 4-3. Net Id Screen
SUBNET MASK
Enter Subnet Mask:
255.255.255.0
Bksp, Clear, Enter
Figure 4-4. Subnet Mask Screen