Inserting Computer In Terminal Holder; Inserting A 4000 Series Or A 62Xx Computer - Intermec 6820 Series User Manual

Inserting Computer in Terminal Holder

Inserting a 4000 Series or a 62XX Computer

Computer connector
end in printer
6820 Series 80-Column Printer User's Manual
Note: When removing the computer, do not press the computer keys
against the terminal slide retainer. Always store the computer in the termi-
nal holder.
The fixed mount or portable printers have terminal holder options for the
4000 Series, 61XX, 62XX, 600 Series, 700 Series, or CK60 Computer.
Do the following to insert either a 4000 Series or a 62XX Computer into
the terminal holder:
1 Insert the bottom of the computer into the terminal slide retainer.
2 Use the computer to push the terminal slide retainer all the way in the
direction shown. See part A in the following illustration.
3 Lower the connector end of the computer into the terminal holder.
4 Slide the computer to fully seat it in the printer docking connector. See
part B in the following illustration.
(A)
Terminal slide retainer
Chapter 2
Bottom (or battery)
end of computer.
—
Operation
(B)
23