I Auto Power-Off Function - Icom IC-R5 Instruction Manual

D Cloning using a personal computer
Data can be cloned to and from a personal computer (Mi-
crosoft ® Windows ® 98/Me/2000/XP) using the optional CS-R5
and the optional OPC-478U
CLONING SOFTWARE
. Consult the CS-R5
CABLE CLONING SOFTWARE
details.
D Cloning error
NOTE: DO NOT push any key on the sub-receiver during
cloning. This will cause a cloning error.
When the display appears as below, a cloning error has oc-
curred.
In such a case, both receivers automatically return to the
clone standby condition and cloning must be repeated.
Microsoft and Windows are registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.

I Auto power-off function

CLONING
The IC-R5 can be set to automatically turn OFF after a spec-
HELP file for
ified period in which no operation is performed.
120 min., 90 min., 60 min., 30 min. and OFF can be specified.
The specified period is retained even when the receiver is
turned OFF by the auto power-off function. To cancel the
function, select "OFF" in step e below.
q Push [TS•SET] for 1 sec. to enter set mode.
w Rotate [DIAL] to select "AP OFF" item.
• Turn the expanded set mode ON for selection. (p. 39)
eWhile pushing [FUNC], rotate [DIAL] to select the desired
time or to turn the function OFF.
r Push [TS•SET] to exit set mode.
OTHER FUNCTIONS
EXPANDED SET MODE
USING
[DIAL]
[FUNC]
After 1 sec.
[TS•SET]
10
10
52