I Dial Select Step - Icom IC-R5 Instruction Manual

4
BASIC OPERATION

I Dial select step

This receiver has a 1 MHz tuning step for quick frequency
setting. This dial select step can be set to 100 kHz, 1 MHz or
10 MHz steps, as desired.
D D Setting dial select step
q Select VFO mode with [V/M•S.MW•~].
w Push [TS•SET] for 1 sec. to enter set mode.
e Rotate [DIAL] to select "D SEL."
• "D SEL" disappears after 1 sec. and "1M" (default) and "DS" ap-
pear.
rWhile pushing [FUNC], rotate [DIAL] to select the desired
dial select step.
• 100 kHz, 1 MHz and 10 MHz can be selected.
t Push [TS•SET] momentarily to exit set mode.
15
[
[DIAL]
1 MHz step
[FUNC]
[TS•SET]
10 MHz step
100 kHz step