Tone Squelch And Pocket Beep; I Tone/Dtcs Squelch Operation - Icom IC-R5 Instruction Manual

8

TONE SQUELCH AND POCKET BEEP

I Tone/DTCS squelch operation

The tone or DTCS squelch opens only when receiving a sig-
nal with the same pre-programmed subaudible tone or DTCS
code, respectively. You can silently wait for the specified sig-
nal using the same tone.
q Set the desired frequency in FM mode.
w Push [TS•SET] for 1 sec. to enter set mode.
e Rotate [DIAL] to select "EXPAND" item.
rWhile pushing [FUNC], rotate [DIAL] to turn the expanded
set mode ON.
t Rotate [DIAL] to select "TSQL" item.
yWhile pushing [FUNC], rotate [DIAL] to select the desired
subaudible tone condition from "TSQL," "P BEEP," "DTCS,"
"P DTCS" and "OFF."
Tone squelch selection
DTCS selection
35
Tone squelch with pocket
beep function selection
DTCS with pocket beep
function selection
u Push [TS•SET] to exit set mode.
• One of "TSQL," TSQLS," "DTCS" or "SDTCS" appears ac-
cording to the tone selection in the step y.
FM T SQL P SKIP
Tone squelch selection
FM DTCS SKIP P
DTCS selection
iWhen a signal with the matched tone is received, the
squelch opens and the receiver emits audio.
When pocket beep function is activated, the receiver also
emits beep tones and blinks "S".
• Beep tones sound and "S" blinks for 30 sec.
o Push [FUNC] to stop the beeps and blinking manually.
• "S" disappears and the pocket beep function is deactivated.
!0 T o cancel the tone squelch or DTCS, select "OFF" with the
"TSQL" item in the expanded set mode, as described in the
step y.
FM T SQL P SKIP
Tone squelch with pocket
beep function selection
FM DTCS SKIP P
DTCS with pocket beep
function selection