I Partial Reset; I All Reset - Icom IC-R5 Instruction Manual

10
OTHER FUNCTIONS

I Partial reset

If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing
the memory contents, a partial resetting function is available
for the receiver.
➥ While pushing [FUNC] and [TS•SET], turn the power ON
to partially reset the receiver.
53
POWER ON
AT
[FUNC]
[TS•SET]
[PWR]

I All reset

The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial resetting is also available. See left for details.
IMPORTANT!:
Resetting the receiver CLEARS all memory information
and initializes all values in the receiver, including TV chan-
nel skip setting.
➥ While pushing [FUNC] and [V/M•S.MW•~], turn the
power ON to reset the CPU.
[FUNC]
[V/M•S.MW•~]
[PWR]
POWER ON
AT
FM P SKIP
*The appearing frqeuency
is differ according to
receiver version.