I Auto Power-Off Function - Icom IC-R20 Instruction Manual

Icom america communications receiver instruction manual

Hide thumbs Also See for IC-R20:

Table of Contents

OTHER FUNCTIONS

D Cloning error

NOTE: DO NOT push any key on the sub-receiver during

cloning. This will cause a cloning error.

When the display appears as below, a cloning error has oc-

curred.

In such a case, the receiver automatically performs ALL

RESET while turning power OFF and ON.

146 010

√

Turn power OFF, then ON

I Auto power-off function

The IC-R20 can be set to automatically turn OFF after a spec-

iﬁed period in which no operation is performed.

BUSY, 120 min., 90 min., 60 min., 30 min. and OFF can be

speciﬁed. The speciﬁed period is retained even when the re-

ceiver is turned OFF by the auto power-off function. To cancel

the function, select "OFF" in step e below.

q Push [8 SET] for 1 sec. to enter set mode.

wRotate [R-DIAL] to select "AUTO POWER OFF" item, then

push [8 SET].

• Turn the expanded set mode ON for selection. (p. 49)

[R-DIAL]

DUALWATCH

SET

eRotate [R-DIAL] to select the desired time or to turn the

function OFF, then push [8 SET].

r Push [DUALWATCH] to exit set mode.

EXPANDED SET MODE

USING

Table of Contents