Icom IC-R5 Instruction Manual page 53

D D Power save
The power save function reduces the current drain to con-
serve battery power. This power save function can be turned
OFF, if desired.
In the default setting ("ON" selection), the power save func-
tion is activated in 1:4
(125 msec.: 500 msec.)
nal is received for 5 sec. The ratio becomes 1:8
when no signal is received for another 60 sec.
1 sec.)
Power save ON
ratio when no sig-
(125 msec.:
Power save OFF
D D Antenna selection
This item appears only when accessing set mode from
AM or FM broadcast band, 0.495–1.620 MHz or
76.000–107.995 MHz (differ according to version), re-
spectively. And the selectable condition is differ ac-
cording to the selected band.
Select using antenna for the AM or FM broadcast band re-
ception independently.
• EXT : Use the antenna connected to the antenna con-
nector. (default)
• BAR : Use the internal bar antenna for AM broadcast
band reception. (This selection appears only
when accessing set mode from AM broadcast
band.)
• EAR : Use the connected earphone's cable as the an-
tenna for FM broadcast band reception. (This se-
lection appears only when accessing set mode
from FM broadcast band.)
External antenna
9
SET MODE
Internal bar antenna
Connected earphone cable
9
42