Beep Tones; Auto Power-Off Function - Icom COMMUNICATIONS RECEIVER IC-R3 Instruction Manual

13
OTHER FUNCTIONS

Beep tones

The volume level for confirmation beep tones, which sound
each time a switch is pushed, can be adjusted, as desired.
When "VOLUME" is selected, the beep tone volume level is
linked with the receive volume level.
q Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until "Beep Audio" or "bEEP" appears.
• "bEEP" disappears after 1 sec. and "bE" appears when color LCD
is OFF.
e Push [↔] or rotate the tuning dial while pushing [FUNC] to
set the volume level.
r Push [(MODE) SET] to exit set mode.
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Beep tone is turned
ON and linked with
the volume level.
40
Pause Scan : 10SEC Pause Scan : 10SEC
Priority : OFF Priority
Beep Audio : ______ Beep Audio : OOO___
Light : AUTO Light
A.Power OFF : OFF A.Power OFF :
Beep tone is turned Beep tone is fixed
OFF (minimum). to the set level.

Auto power-off function

The receiver can be set to automatically turn OFF after a
specified period with beep in which no switch is pushed.
120 min., 90 min., 60 min., 30 min. and OFF can be speci-
fied. The specified period is retained even when the receiver
is turned OFF by the auto power-off function. To cancel the
function, select "OFF" in step e below.
q Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until "A.Power OFF" or "AP oFF" appears.
• "AP oFF" disappears after 1 sec. and "Ao" appears when color
LCD is OFF.
e Push [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired time or to turn the function OFF.
r Push [(MODE) SET] to exit set mode.
: OFF
: AUTO
OFF
Auto power off set
mode
60 min. auto power-off Auto power-off is
turned OFF.