Table of Contents
Advertisement
4-16 Installing the Aculab E1/PRI signaling option
Standard 1.0
July 1997
13
If you are not familiar with the Space.c file, type n to disregard this
question and continue the installation.
The system responds with the following message:
Do you wish to continue the installation [y/n]:
14
Type y and press <Enter> to continue.
The system displays the following message:
Updating the tunable kernel parameters
The kernel has been retuned
The UNIX Operating System will now be rebuilt.
This will take a few minutes. Please wait.
Root for this system build is /.
The UNIX Kernel has been rebuilt.
Backing up unix to unix.old
Installing new unix on the boot file system
Setting up new kernel environment
The system must now be rebooted for the new parameters
to take affect
The Nortel xxx Parameters
have now been installed.
/sci/install>
15
Make sure that the last installation diskette has been removed from the
disk drive.
16
At the /sci/install> prompt, enter restart and press <Enter>.
The system verifies the integrity of the newly installed packages, and
informs you of any inconsistencies.
17
The MRS starts shutting down. The system automatically reboots once
it reaches the shutdown state.
18
Allow the system to boot up normally. It takes several minutes.
Advertisement
Table of Contents
