Figure 4-1: Possible PEB bus configurations with the Aculab modules
Voice
Processing
Module
T
t=Internal Terminator
10
Power up the system and allow it to boot normally. When the ready
light on the front panel stops flashing, the installation of the Aculab E1
interface option hardware is complete.
Additional Modules
(voice processing, fax, TTS,
ASR resources, etc.)
ACL-30 E1
t
Additional Modules
(voice processing, fax, TTS,
ASR resources, etc.)
PEB 0
Nortel IVR 2.5/S
Installing the Aculab E1/PRI signaling option 4-3
Processing
PEB bus
ACL-60 E1
t
t
Aculab-Based E1 CAS/ISDN PRI Signaling Guide
Voice
Module
T
Voice
Processing
Module
PEB 1
T=External Terminator
T