Table of Contents
Advertisement
4-6 Installing the Aculab E1/PRI signaling option
Standard 1.0
July 1997
6
Insert the MRS Version 3.02.01 CAS Signaling option diskette and
press <Enter>. The system responds with these messages:
Searching for the Size file
Ignore the CUSLIST error messages. The system will continue with
these messages:
/sci/install>
7
Remove the diskette.
8
Run the Nortel customization script (refer to the section "Nortel
Customization Procedure" in Chapter 6 of the Nortel IVR 2.5/S Product
Overview Guide ).
9
Continue with Procedure 4-4 on page 4-9.
Note: If it is not necessary for you to configure the country
parameters, then restart the MRS now as described in steps 10 to 13
on page 4-12.
Install in progress
Installing files...
Installation complete.
Advertisement
Table of Contents
