Nortel IVR 2.5/S Manual page 13

A prompt then appears asking if you want to continue.
Are you sure you wish to continue?
Current continue = no
yes
no
Continue? =
The installation script suspends all MRS processes and then displays
the /sci/install> prompt.
3 Enter y and press <Enter> to continue with the installation.
The following messages are displayed:
Stopping the System Now!
.
. (various messages)
.
/sci/install>
4 Wait until the Ready light on the front panel of the MRS begins flashing
before continuing. This step ensures that all MRS processes were
stopped. On the MRS/AP, there is no Ready light to observe (just
proceed to the next step).
5 At the /sci/install> prompt, type package and press <Enter>.
The following prompt is displayed:
Insert the floppy - type q to quit or hit ENTER to
continue:
Nortel IVR 2.5/S
Installing the Aculab E1/PRI signaling option 4-5
- Continue with operation.
- Return to the previous menu.
ATTENTION
Aculab-Based E1 CAS/ISDN PRI Signaling Guide