Table of Contents
Advertisement
4-8 Installing the Aculab E1/PRI signaling option
Standard 1.0
July 1997
5
At the /sci/install> prompt, type package and press <Enter>.
The following prompt is displayed:
Insert the floppy - type q to quit or hit ENTER to
continue:
6
Insert the MRS Version 3.02.01 Enhanced DPNSS Signaling Option
diskette and press <Enter>.
The system responds with these messages:
Searching for the Size file
Ignore the CUSLIST error messages. The system will continue with
these messages:
/sci/install>
7
Remove the diskette.
8
Run the Nortel customization script (refer to the section "Nortel
Customization Procedure" in Chapter 6 of the Nortel IVR 2.5/S Product
Overview Guide ).
9
Continue with Procedure 4-5 on page 4-13.
Note: If it is not necessary for you to configure the country
parameters, then restart the MRS now as described in steps 15 to 18
on page 4-16.
Install in progress
Installing files...
Installation complete.
Advertisement
Table of Contents
