Assembling The Main Shaft - Husqvarna FE 350 2014 Repair Manual

ENGINE
18
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the shift dogs of idler gears
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth faces of idler gears
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth profiles of sliding gears
If there is damage or wear:
-
Change the gear wheel pair.
0
-
Check sliding gears for smooth operation in the profile of main shaft
lf the sliding gear does not move freely:
-
Change the sliding gear or the main shaft.
0
-
Check sliding gears for smooth operation in the profile of countershaft
If the sliding gear does not move freely:
-
Change the sliding gear or the countershaft.
-
Check stop disks @ for damage and wear.
If there is damage or wear:
-
Change the stop disks.
@)
-
Use new lock rings with every repair.
18.4.40

Assembling the main shaft

Info
Use new lock rings with every repair.
Preparatory work
-
Carefully lubricate all parts before assembling.
-
Check the transmission. (,... p. 165)
Main work
-
Secure the main shaft with the toothed end facing downward in the vise.
Guideline
Use soft jaws
C,
and sliding gears @) for damage and wear.
C,,
sliding gears @), and fixed gear (3 for damage and wear.
0
for damage and wear.
8-
@).
305011-11
166