Husqvarna FE 350 2014 Repair Manual page 117

16
BRAKE SYSTEM
Open the bleeder screw again until no more brake fluid emerges.
• Info
I
This prevents overfilling of the brake fluid reservoir.
Tighten the bleeder screw. Remove the hose of the bleeder bottle. Mount the pro­
tection cap.
Disconnect the bleeding device. Remove the bleeder cover.
Stand the vehicle upright.
Correct the brake fluid up to marking (i).
I
Brake fluid DOT 4 (.- p. 256)
Fit and tighten plug with oil screen and O-ring.
• Info
I
Clean up overflowed or spilt brake fluid immediately with water.
Check the foot brake lever for a firm pressure point.
115