P0-9 Perkins Engine Maintenance - Under 1000 Hours - Genie Z Series Maintenance Manual

April 2018
P0-9
Perkins Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
This maintenance schedule applies to the following Perkins Engines:
Perkins 403D-11
Perkins 404F-22
Perkins 1104D-44T
Perkins Engine
Procedure
Air filter discharge valve - clean
Oil, fuel and coolant systems - check for leaks
Alternator belt - inspect/adjust/replace
Coolant level – check/add
Oil level - check
Fuel system filter/water separator – drain
Engine air precleaner - check/drain
Fuel tank water/sediment - drain
Hoses and clamps – inspect/replace
Battery electrolyte level - check
Cooling system supplement additive - test/add
Engine oil and filter – replace
Fuel system filter(s) - replace
Radiator – clean
Air cleaner element - clean/replace
Fan clearance - check
Part No. 1268489GT
Programmed Maintenance Procedures
Perkins 403F-11
Perkins 404F-22T
S ® Booms • Z
Perkins 404D-22
Perkins 804D-33
∅ = Not required
® Booms
Maintenance Manual
Perkins 404D-22T
Perkins 854F-34T
Hour Intervals
Daily 50
∅
∅
∅
∅
∅
∅
∅
∅
∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
∅ ∅
500
∅
∅
∅
∅
∅
∅
∅
∅
∅
137