Table of Contents
Advertisement
Guide to Components
1. Power cord
Plug the power cord into a wall outlet.
2. Holder slot
Set the holder here.
3. Filter slot
Insert the P or N filter here.
4. Film cover
To protect the slots from dust, close it when you
are not using the projector.
5. Mirror unit release lever
Slide this to the left when opening the mirror
unit.
6. Focusing lever
Adjusting the focus with this lever when you
make copies from a glass mount film.
172
Guide to Components
7. Power switch
Switches the power on or off.
8. Mirror unit
Reflects the light from the projector to the copier.
9. Fresnel lens
Pull this up when setting film on the exposure
glass.
10. Lens cover
To protect the lens from dust, close it when you
are not using the projector.
11. Accessory box
Accessories should be stored here.
12. Holder lever
Use to set the holder into the holder slot.
Advertisement
Table of Contents
