Table of Contents
Advertisement
Turning on the Power
1
Press the operation switch to make the On indi-
cator lights up.
Note
If the power is not turned on when the operation switch
is pressed, check if the main power switch is on. If off,
turn it on.
During the warm-up period (about 7 minutes), you can
use the Auto Start function.
When the machine is set for user codes
1
Enter your user code using the Number keys.
Then press the # key.
Note
To prevent others from making copies with your user code, press the Clear Modes key and the Clear/Stop key
simultaneously after copying.
Reference
For setting user codes,
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
1
Press any key.
The machine will return to the ready condition.
Note
The machine will also return to the ready condition when an original is set in the document feeder, or when the platen
cover or the document feeder is opened.
see page 53.
see page 160.
Starting the Machine
27
Advertisement
Table of Contents
