Choosing Next Job
After copying, you can select the next job:
[Select Film]
If you want to change the type of film, press this key.
[Shading]
If the mirror unit is moved, or if some lines appear on the copy, press this key and perform shading again.
[Color Balance/Density]
If you want to adjust the color tone, image density, or adjust the focus manually, press this key.
[Continue]
If you want to copy the same film again, or if you want to copy another film which is of the same type, press this
key.
1
Press the Special Accessory key.
2
Select the key.
196
Choosing Next Job