Table of Contents
Advertisement
Basic Operation
4
Press the [OK] key.
5
Adjust the paper guides to the paper size.
Note
Make sure that the paper guides matches to the paper
size. If the paper guides are not adjusted to the paper
size properly, paper might be skewed or a paper
misfeed might occur.
With large copy paper (more than A4l, 8
swing out the extender.
6
With the side you wish to copy onto face up, in-
sert the paper into the bypass tray until it stops.
7
Set your originals, then press the Start key.
Copying onto custom size paper with the bypass tray
Preparation
You can register custom paper sizes you use often in keys [Custom1], [Custom2], and [Custom3] with the user tools.
see page 157.
Note
Be sure to set the size. Otherwise, a paper misfeed might occur.
1
Open the baypass tray.
2
Press the [Normal], [Thick], or [OHP] key.
3
Press the [l/p] key to select paper orientation.
4
Press the [Custom Size] key.
5
Select [Custom1], [Custom2], [Custom3] or
[Enter Size] keys.
Note
If you select [Custom1], [Custom2], or [Custom3],
go to step 8.
46
" × 11"l),
1/2
1:Horizontal size
2:Vertical size
3:Extender
4:Paper guides
Advertisement
Table of Contents
