Table of Contents
Advertisement
Selecting the Film Type and Performing Shading
7
If needed, adjust the color, density, or focus.
Reference
For details,
see page 192.
8
If needed, select the copier modes.
Reference
For details,
see page 195.
9
Press the Start key.
0
Choose your next job.
Reference
For details,
see page 196.
Positive Film on Glass
1
Press the [Shading] key.
2
Insert the "P" (Positive filter) in the left slot as
shown in the illustration.
Note
Be careful to insert the filter as shown, not the other
way around.
3
Cut the positioning sheet to match the film size.
Reference
Regarding the positioning sheet,
4
Place the positioning sheet under the mirror unit
(on the exposure glass).
Note
Place the marked corner of the film position sheet at
the rear left corner of the exposure glass.
Before going to the next step, make sure that the fresnel
lens is lowered in position.
186
see page 183.
1: Filter
1
1: Positioning sheet
1
TRSR0F0E
TRSR0G0E
Advertisement
Table of Contents
