Setting Fax Forwarding - HP MFP Analog Fax Accessory 300 Fax Manual

3
4
5
6
7
8

Setting fax forwarding

The forward fax setting allows you to forward all received faxes to
another fax number. When forward fax is enabled, the receiving MFP
prints the fax (if fax printing is disabled, the fax prints when the
printing is enabled), and also forwards the fax to the fax forward
number.
If the fax fails to forward to another phone number, the device will not
Note
attempt to forward the fax again. Also, all faxes will be forwarded in fine
or standard resolution.
To set fax forwarding, complete the following steps.
1
2
3
4
5
Always save your PIN in a secure place. If you loose your PIN, you must
Note
contact HP Service Support for information on how to reset the PIN.
For more information, see "Customer Support" on page 80.
6
7
60 Chapter 4 Faxing (advanced)
Scroll down and touch FAX RECEIVE.
Scroll down and touch FORWARD FAX or FAX PRINTING to
display the settings screen.
Touch CHANGE PIN to display the PIN screen.
Using the keypad, type the PIN (at least four digits), and then
touch OK to display the CHANGE PIN screen.
Type a new PIN using the keyboard, then press OK.
Verify the PIN by typing it again, and then touch OK to save the
new PIN.
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Scroll down and touch FAX RECEIVE.
Scroll down and touch FORWARD FAX to display the PIN screen.
Using the keypad, type your PIN (must be at least four digits) and
touch OK. If you have an existing PIN, the FORWARD TO
NUMBER screen displays. If a PIN has not been created, you are
prompted to verify the new PIN by typing it again, and then press
OK.
Touch FAX FORWARDING to display the FAX FORWARDING
settings screen.
Touch FORWARD TO NUMBER to display the keyboard.
ENWW