10 Connect one phone cord connector (1) into the FAX connector
Making cabling connections - HP LaserJet 4345mfp
Figure 1-10
11 Connect the other end of the phone cord into the phone jack on
12 Plug the MFP AC power cord in and set the power switch to on.
This completes the installation of the fax card. Next, you need to
verify that the fax has been installed correctly and is operating, see,
"Verifying fax operation" on page 20.
ENWW
(2), see Figure 1-10. Push it in until it "clicks."
the wall. Push the connector until you hear a click or until the
connector is securely seated. Because there are different types of
connectors, depending on the country/region, the connector
might make an audible click when connected or might not make
an audible click.
LAN Cable (if used)
Phone cord
Installing the fax accessory 11