Setting Jbig Compression Mode; Setting Outgoing Fax Resolution - HP MFP Analog Fax Accessory 300 Fax Manual

3
4
5

Setting JBIG compression mode

Enabling JBIG compression can reduce phone call charges by
reducing fax transmission time and is, therefore, the preferred setting.
However, JBIG may cause compatibility problems when
communicating with some older fax machines, in which case you
may need to disable it.
JBIG compression only works when both the sending and receiving
Note
machines have JBIG compression.
To enable or disable JBIG compression, perform the following steps.
1
2
3
4
5

Setting outgoing fax resolution

The outgoing fax resolution setting determines the maximum
resolution supported by the receiving fax. The fax accessory uses
the highest possible resolution, limited by this setting, and the
maximum resolution of the receiving fax.
Faxes wider than 21.25 cm (8.5 inches), will automatically be sent using
Note
standard or fine, to reduce phone time.
To set the resolution, perform the following steps.
1
2
3
ENWW
Touch FAX SETUP OPTIONAL to display the optional
setup items.
Touch ERROR CORRECTION MODE to display the settings.
Touch ON (default) to enable error correction mode, or touch OFF
to disable correction mode.
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Touch FAX SETUP OPTIONAL to display the optional setup
items.
Touch JBIG COMPRESSION to display the settings.
Touch ON (default) to enable JBIG compression, or touch OFF to
disable JBIG compression.
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Scroll down and touch FAX SEND.
Setting JBIG compression mode 49