7
Replacing an existing fax accessory
Figure 1-18
8
The fax accessory contains parts that are sensitive to electrostatic
discharge (ESD). When removing the fax accessory from its antistatic
pouch and while installing it, use static protection, such as a
grounding wrist strap that is connected to the metal frame of the MFP,
or touch the metal frame of the MFP with your other hand.
9
Inserting the fax accessory
Figure 1-19
16 Chapter 1 Setting up
If you are replacing an existing fax accessory, pull up to remove it.
Remove the fax accessory from its antistatic pouch.
Align the fax accessory with the two guides. Make sure that the
connector pins are aligned, and then push the fax accessory into
place. Make sure that the fax accessory is securely connected to
the formatter.
ENWW