HP MFP Analog Fax Accessory 300 Fax Manual page 37

All settings made on the Settings screen are temporary settings,
Note
enabled for the current fax only.
4
Notify/Notification changes the notification setting for the current fax
Note
only. To change the default setting, see "To schedule fax call report
printing" on page 66.
5
6
7
8
ENWW
If the settings do not match, complete the following steps.
a Touch Describe Original to display the Original Setting
screen.
b Make any required changes to match your original.
c When all settings are completed, touch OK to return to the
Settings screen.
On the Settings screen touch Fax Settings to make adjustments
to the following settings:
• Sharpness—enhances text and graphic edges. For additional
information, see "Changing the sharpness setting" on page 42.
• Background—removes a background that might be a result
from copying color paper. For additional information, see
"Changing the background setting" on page 43.
• Notify/Notification—changes how you are notified of the
status of the fax transmission (that is, if the fax was sent or if
an error occurred and the fax was not sent). For the
HP LaserJet 4345mfp and the 4730mfp, access to the
notification settings is through the Notify button located on the
main fax screen. For additional information, see "Changing
notification settings" on page 36.
When all settings are completed, touch OK to return to the
Settings screen.
On the Settings screen, to adjust the lightness/darkness of the
fax you are sending, touch the Light or Dark arrows.
When all settings are completed on the Settings screen, touch
OK to return to the Fax screen.
Using the keyboard, enter a phone number. To enter additional
numbers, touch Next Number and continue entering numbers.
To remove a number from the list, use the arrow keys to highlight
a number and then touch Remove.
Sending faxes 29