Hp Mfp Digital Sending Software Configuration Utility - HP MFP Analog Fax Accessory 300 Fax Manual

3
4
In addition to configuring a single MFP, you can also perform multiple
device configuration. Multiple device mode configures several MFPs
at once. For information on this feature, see the HP Web Jetadmin
Reference Manual.
HP MFP Digital Sending Software Configuration
Utility
To access the analog MFP fax settings using the DSS configuration
utility, perform the following steps.
1
2
3
4
In addition to configuring a single MFP, you can also configure
multiple devices. For more information on the HP MFP Digital
Sending Software Configuration Utility, see the HP MFP Digital
Sending Software User Guide or the HP MFP Digital Sending
Software Support Guide.
Depending on the capabilities and settings of your fax method, some
Note
of these options may not be available or configurable.
ENWW
Configure the options in the Fax Settings or the Advanced Fax
Settings sections. For information about a specific setting, select
the context help next to the setting.
After you have made changes to the settings, select Apply to
accept the settings.
Start the utility (on the PC or server) to display the main screen.
Select the MFP and click the Configure MFP button from the
main screen, and then select the Send to Fax tab to display the
Fax Settings screen.
To enable the fax capabilities on the MFP, check Enable Send to
Fax. To access Analog Fax settings, select directly from the
mfp's internal modem from the Send Faxes... drop-down list.
On the Fax Settings screen make any changes to the settings
and select OK to accept the settings. Select Advanced to display
the Advanced MFP Modem Settings screen for additional fax
settings.
For information about these settings, see the setting descriptions
in this guide.
After you have made changes to the settings, select OK to accept
the settings.
Remote fax configuration 47