Making cabling connections to the formatter for the HP LaserJet
Figure 1-6
9040/9050mfp
11 Connect the other end of the phone cord into the phone jack on
12 Plug in the MFP AC power cord and set the power switch to on.
This completes the installation of the fax card. Next, you need to
verify that the fax has been installed correctly and is operating. See
"Verifying fax operation" on page 20.
ENWW
the wall. Push the connector until you hear a click or until the
connector is securely seated. Because there are different types of
connectors, depending on the country/region, the connector
might make an audible click when connected or might not make
an audible click.
LAN Cable (if used)
Phone cord
Installing the fax accessory 7