Configuring Voice Service And Voicemail; Using The Wizard To Configure Itsp Voice Services And Voicemail - Linksys SPA9000 Administrator's Manual

Using the Wizard to Configure ITSP Voice Services and Voicemail

Figure 3-1
Step 2
Select Configure SPA9000 from the Main Menu.
The system displays the page shown in
Figure 3-2
Step 3
Select Using an ITSP to configure ITSP voice servers or voicemail.
If you are using both ITSP and the SPA400 for voicemail or PSTN connectivity, select Using both ITSP
and PSTN and refer to the
page 3-8
Step 4
Click Next.
The system displays the page shown in
Linksys SPA9000 Administrator Guide
3-2
Setup Wizard—Main Menu
Configuring the Connection Type
"Configuring the SPA400 for PSTN Connectivity or Voicemail" section on
for instructions about using the Wizard to configure the SPA400.
Chapter 3
Figure 3-2.
Figure 3-3.

Configuring Voice Service and Voicemail

Document Version 3.01