Linksys SPA9000 Administrator's Manual page 179

Chapter 6 SPA9000 Field Reference
Block CID Deact Code
Block CID Per Call Act Code
Block CID Per Call Deact Code
Block ANC Act Code
Block ANC Deact Code
DND Act Code
DND Deact Code
CID Act Code
CID Deact Code
CWCID Act Code
CWCID Deact Code
Dist Ring Act Code
Dist Ring Deact Code
Speed Dial Act Code
Secure All Call Act Code
Secure No Call Act Code
Secure One Call Act Code
Document Version 3.01
Removes caller ID blocking on all outbound calls.
The default is *68.
Blocks caller ID on the next outbound call.
The default is *81.
Removes caller ID blocking on the next inbound call.
The default is *82.
Blocks all anonymous calls.
The default is *77.
Removes blocking of all anonymous calls.
The default is *87.
Enables the do not disturb feature.
The default is *78.
Disables the do not disturb feature.
The default is *79.
Enables caller ID generation.
The default is *65.
Disables caller ID generation.
The default is *85.
Enables call waiting, caller ID generation.
The default is *25.
Disables call waiting, caller ID generation.
The default is *45.
Enables the distinctive ringing feature.
The default is *26
Disables the distinctive ringing feature.
The default is *46.
Assigns a speed dial number.
The default is *74.
Makes all outbound calls secure.
The default is *16.
Makes all outbound calls not secure.
The default is *17.
Makes the next outbound call secure. (It is redundant if all outbound calls are secure by
default.)
The default is *18.
Linksys SPA9000 Administrator Guide
Regional Tab
6-31