Chapter 6
SPA9000 Field Reference
Line 1/2/3/4 Tab
This section describes the fields for the following headings on the Line 1, Line 2, Line 3, and Line 4
tabs:
•
•
•
•
•
Note
In a configuration profile, the Line parameters must be appended with [1] or [2] to identify the line to
which the setting applies.
Line Enable
Field
Line Enable
Network Settings
Field
SIP ToS/DiffServ Value
SIP CoS Value [0-7]
RTP ToS/DiffServ Value
RTP CoS Value [0-7]
Document Version 3.01
Line Enable, page 6-47
Network Settings, page 6-47
SIP Settings, page 6-48
Subscriber Information, page 6-50
Dial Plan, page 6-52
Description
To enable this line for service, select yes. Otherwise, select no.
The default is yes.
Description
TOS/DiffServ field value in UDP IP packets carrying a SIP message.
The default is 0x68.
CoS value for SIP messages.
The default is 3.
ToS/DiffServ field value in UDP IP packets carrying RTP data.
The default is 0xb8.
CoS value for RTP data.
The default is 6.
Linksys SPA9000 Administrator Guide
Line 1/2/3/4 Tab
6-47