Auto Attendant Parameters - Linksys SPA9000 Administrator's Manual

SIP Tab
Internal Music Use Pref Codec
Only

Auto Attendant Parameters

Field
AA Dial Plan 1
AA Dial Plan 2
AA script 1/2/3
Daytime AA
Nighttime AA
Weekend/Holiday AA
Day Time
Linksys SPA9000 Administrator Guide
6-18
Forces the internal music player to use the preferred codec only.
The default is is no.
Description
Dial Plan 1 to be used in an AA script. Example: <dialplan src=dp1/>.
The default is: (10x|xxx.)
Dial Plan 2 to be used in an AA script. Example: <dialplan src=dp2/>.
The default is: (<:10>x|xxx.)
AA script. See Chapter 4, Configuring the LVS Auto-Attendant, for the complete syntax.
The default is:
<aa><form id="dir" type="menu">
<audio src="prompt1" bargein="T"/>
<noinput timeout="10" repeat="T"/>
<nomatch repeat="F">
<audio src="prompt3" bargein="T"/>
</nomatch>
<dialplan src="dp1"/>
<match>
<default>
<audio src="prompt2"/>
<xfer name="ext" target="$input"/>
</default></match>
</form></aa>
To enable the daytime Auto-Attendant, select yes. Otherwise, select no.
The default is is yes.
To enable the nighttime Auto-Attendant, select yes. Otherwise, select no.
The default is is no.
To enable this Auto-Attendant, select yes. Otherwise, select no.
The default is is no.
Daytime hours for the daytime Auto-Attendant in 24-hour format. Enter the start and
end times in this format: start=hh:mm:ss;end=hh:mm:ss (hh for hours, mm for
minutes, and ss for seconds).
For example, start=9:0:0;end=17:0:0 means that the start time is 9 AM and the end
time is 5 PM. The other hours (5 PM to 9 AM) are considered nighttime hours.
If you do not enter start and end times, the whole day (24 hours) is considered as daytime,
so the nighttime Auto-Attendant is not used, even if it is enabled.
Chapter 6 SPA9000 Field Reference
Document Version 3.01