Linksys SPA9000 Administrator's Manual page 59

Chapter 2 Getting Started
<Extension_2_>1</Extension_2_>
<Short_Name_2_>next-available-user-id</Short_Name_2>
<Extension_3_>1</Extension_3_>
<Short_Name_3_>next-available-user-id</Short_Name_3>
<Extension_4_>1</Extension_4_>
<Short_Name_4_>next-available-user-id</Short_Name_4>
<Station_Name>client-station-mac-address</Station Name>
<Resync_Periodic>1</Resync_Periodic>
<Resync_Error_Retry_Delay>10</Resync_Error_Retry_Delay>
<Profile_Rule>tftp://spa-9000-ip-address:69/cfg/generic.xml</Profile_Rule>
<Linksys_Key_System>1</Linksys_Key_System>
</flat-profile>
The following XML file is served by the SPA9000 when a client station requests /cfg/generic.xml:
<flat-profile>
<Resync_Periodic>0</Resync_Periodic>
<Resync_Error_Retry_Delay>3600</Resync_Error_Retry_Delay>
<Admin_Passwd>spa-9000-admin-passwd</Admin_Passwd>
<Password_1_>phone-ext-password</Password_1_>
<Proxy_1_>spa-9000-ip-address:proxy-listen-port</Proxy_1_>
<Voice_Mail_Server_1_>spa-9000-ip-address:proxy-listen-port </Voice_Mail_Server_1_>
<Voice_Mail_Number>vmm</Voice_Mail_Number>
<Cfwd_Busy_Dest>vm</Cfwd_Busy_Dest>
<Cfwd_No_Ans_Dest>vm</Cfwd_No_Ans_Dest>
<Multicast_Address>spa-9000-multicast-address</Multicast_Address>
<Upgrade_Rule>phone-upgrade-rule</Upgrade_Rule>
<Dial_Plan>phone-dial-plan</Dial_Plan>
<Linksys_Key_System>1</Linksys_Key_System>
<Remote_Party_ID_1_>1</Remote_Party_ID_1_>
<Time_Zone>time-zone</Time_Zone>
<Daylight_Saving_Time_Rule>daylight-saving-time</Daylight_Saving_Time_Rule>
</flat-profile>
Table 2-3
Table 2-3
Variable
spa-9000-ip-address
proxy-listen-port
client-station-mac-address
next-available-user-id
Phone-upgrade-rule
Phone-dial-plan
time-zone
daylight-saving-time
phone-ext-password
Document Version 3.01
lists the variables used in these XML files.
Variables Used in XML Configuration Files
Description
IP address of the SPA9000 SIP Proxy.
Port at which the SPA9000 SIP Proxy is listening. This value is
configured in <Proxy Listen Port>.
This is the MAC address of the client station who is requesting the
profile /cfg/init_$MA.xml (in other words, the $MA portion of the
requested filename).
The current value of <Next Auto User ID>.
Upgrade rule to be used by the client stations. This value is
configured in <Phone Upgrade Rule>.
Dial plan to be used by the client stations. This value is configured
in <Phone Dial Plan>.
<Time Zone> value that is configured on the SPA9000.
<Daylight Saving Time Rule> value that is configured on the
SPA9000.
<Phone Ext Password> value configured on the SPA9000.
Advanced Methods of Configuration
Linksys SPA9000 Administrator Guide
2-29