Ring And Call Waiting Tone Spec - Linksys SPA9000 Administrator's Manual

Chapter 6 SPA9000 Field Reference
Ring5 Name
Ring6 Name
Ring7 Name
Ring8 Name

Ring and Call Waiting Tone Spec

Field
Ring Waveform
Ring Frequency
Ring Voltage
CWT Frequency
Document Version 3.01
Name in an INVITE's Alert-Info Header to pick distinctive ring/CWT 5 for the inbound
call.
The default is Bellcore-r5.
Name in an INVITE's Alert-Info Header to pick distinctive ring/CWT 6 for the inbound
call.
The default is Bellcore-r6.
Name in an INVITE's Alert-Info Header to pick distinctive ring/CWT 7 for the inbound
call.
The default is Bellcore-r7.
Name in an INVITE's Alert-Info Header to pick distinctive ring/CWT 8 for the inbound
call.
The default is Bellcore-r8.
Description
Waveform for the ringing signal.
The default is Sinusoid.
Frequency of the ringing signal. Valid values are 10–100 (Hz).
The default is 25.
Ringing voltage. 60–90 (V).
The default is 70.
Frequency script of the call waiting tone. All distinctive CWTs are based on this tone.
The default is 440@-10.
Linksys SPA9000 Administrator Guide
Regional Tab
6-27