Linksys SPA9000 Administrator's Manual page 44

Initial Setup and Configuration
Figure 2-7
Step 2
Click Next.
The subsequent screen provides a review of the setup requirements that are required to successfully
complete the wizard. After verifying that you have completed the required setup, click Next.
The system displays Page 3 of the wizard (see
Figure 2-8
Step 3
If you are configuring the SPA9000 for the first time, accept the default and click Next on Page 3.
If you are using the wizard to change your existing configuration, click the second radio button on Page
3 and enter the IP address of your SPA9000 on the page that appears.
Note
If you use the Setup Wizard to configure the SPA9000 after using the administration server web, you
may lose any changes to the factory default configuration that you made using the administration server
web pages.
Linksys SPA9000 Administrator Guide
2-14
SPA Setup Wizard—Page 1
SPA Setup Wizard—Page 3
Figure 2-8).
Chapter 2 Getting Started
Document Version 3.01