Subscriber Information - Linksys SPA9000 Administrator's Manual

Line 1/2/3/4 Tab
Refer-To Target Contact

Subscriber Information

Field
Display Name
User ID
Password
Use Auth ID
Auth ID
Call Capacity
Linksys SPA9000 Administrator Guide
6-50
To contact the refer-to target, select yes. Otherwise, select no.
The default is no.
Description
Display name for caller ID.
Extension number for this line.
Password for this line.
To use the authentication ID and password for SIP authentication, select yes. Otherwise,
select no to use the user ID and password.
The default is no.
Authentication ID for SIP authentication.
Maximum number of calls allowed on this line interface. Choices: {unlimited,1,2,3,...25
}. Default is 16. Note that the SPA9000 does not distinguish between incoming and
outgoing calls when talking about call capacity. Note: unlimited = 16
Chapter 6 SPA9000 Field Reference
Document Version 3.01