The Front Panel - Linksys SPA9000 Administrator's Manual

Chapter 2 Getting Started
Figure 2-3
The following are the interfaces provided by the SPA9000, from left to right:
•
•
•
•

The Front Panel

The SPA9000 LEDs are located on its front panel.
Figure 2-4
The following are the LEDs provided by the SPA900, from left to right:
•
•
•
Document Version 3.01
SPA9000 Back Panel
Phone 1/2—Connect to an analog telephone or fax machine with an RJ-11 cable.
Internet—Connect to a switch, router, or broadband (cable/DSL) modem. Also referred to as the
WAN port, because it provides connectivity to the wide area VoIP network.
Ethernet—For troubleshooting only.
Power—Connect to the power adapter.
SPA9000 Front Panel
Power—Steady green: powered on and connected to the Internet. Flashing: not connected to the
Internet or is booting or upgrading firmware.
Ethernet—Steady green: active connection. Flashing: indicates traffic.
Phone 1/2—Steady green: active/registered connection to ITSP through port. Flashing: in use or off
hook.
Implementing LVS
Linksys SPA9000 Administrator Guide
2-5