Line 1/2/3/4 Status; Fxs 1/2 Status - Linksys SPA9000 Administrator's Manual

Chapter 6 SPA9000 Field Reference

Line 1/2/3/4 Status

)
Field
Registration State
Last Registration At
Next Registration In
Message Waiting
Mapped SIP Port

FXS 1/2 Status

Field
Hook State
Message Waiting
Call Back Active
Last Called Number
Last Caller Number
Mapped SIP Port
Call 1/2 State
Call 1/2 Tone
Call 1/2 Encoder
Call 1/2 Decoder
Call 1/2 FAX
Call 1/2 Type
Call 1/2 Remote Hold
Call 1/2 Callback
Call 1/2 Peer Name
Document Version 3.01
Description
Last date and time the line was registered.
Number of seconds before the next registration renewal.
Indicates whether you have new voicemail waiting: Yes or No. This is updated when
voicemail notification is received. You can also manually modify it to clear or set the flag.
Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is
stored in long term memory and survives after reboot or power cycle.
Port number of the SIP port mapped by NAT.
Description
Status of phone readiness. On indicates that the phone is ready for use; Off indicates that
the phone is in use.
Indicates whether you have new voicemail waiting: Yes or No. This is updated when
voicemail notification is received. You can also manually modify it to clear or set the flag.
Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is
stored in long term memory and survives after reboot or power cycle.
Indicates whether a call back request is in progress: Yes or No.
Last number called.
Number of the last caller.
Port number of the SIP port mapped by NAT.
Status of the call.
Type of tone used by the call.
Codec used for encoding.
Codec used for decoding.
Status of the fax pass-through mode.
Direction of the call.
Indicates whether the far end has placed the call on hold.
Indicates whether the call was triggered by a call back request.
Name of the internal phone.
Linksys SPA9000 Administrator Guide
Info Tab
6-3