Chapter 4
Configuring SPA9000 Features
Figure 4-9
Step 2
Click Add Hunt Group to add a group.
Click Edit to change an existing group, or click Delete to remove a group.
When you click Add Hunt Group, the system displays the page shown in
Figure 4-10 Configure Hunt Group
Step 3
Identify the hunt group and click OK.
When the next screen reappears, the new hunt group is added.
Step 4
Click Submit to create the hunt group.
Using the Wizard for Localization
To use the wizard for setting localization settings for the SPA9000, complete the following steps.
Document Version 3.01
Configure Hunt Groups
Using the Wizard to Configure SPA9000 Voice Features
Figure
4-10.
Linksys SPA9000 Administrator Guide
4-7