Example Sas With Moh - Linksys SPA9000 Administrator's Manual

Chapter 4 Configuring SPA9000 Features
Power off the SPA9000.
Step 1
Connect a phone to the port and make sure the phone is on-hook.
Step 2
Power on the SPA9000.
Step 3
Pick up handset and press * * * * to invoke IVR in the usual way.
Step 4
If the SPA9000 boots and finds that the SAS line is on-hook, it will not remove battery from the line so
that IVR may be used. But if the SPA9000 boots up and finds that the SAS line is off-hook, it will remove
battery from the line because no audio session is in progress.

Example SAS with MOH

Figure 4-15 MOH Application with a SPA9000 Line Configured as an SAS
SPA1:
IP=192.168.2.100
UserID[1]=1001, SIP Port[1]=5060
UserID[1]=1002, SIP Port[1]=5061
In this example, the SAS Line is registered with the SPA9000 as the other subscribers.
On
On
Document Version 3.01
Phone 1
Phone 2
Media
signal
adapter
Music
source
SPA
1:
SAS Enable[1] = no
MOH Server [1] = 1002
SAS Enable[2] = yes
SPA
2:
SAS Enable[1] = no
MOH Server [1] = 1002
SAS Enable[2] = no
MOH Server [2] = 1002
IP Network
Line in
SPA2:
IP=192.168.2.200
UserID[1]=2001, SIP Port[1]=5060
UserID[1]=2002, SIP Port[1]=5061
Phone 1
Phone 2
Linksys SPA9000 Administrator Guide
Music On Hold
4-31