Chapter 4: Configuring The Wireless-G Ip Phone; Status Information - Linksys WIP300 User Manual

Configuring the Wireless-G IP Phone

Status Information

The home screen displays a variety of information about the IP Phone. Refer to the table below for a list of icons that appear on the home screen and their
meanings:
Icon Description
Signal Strength: Indicates the signal strengh of the access point you're IP Phone is connected to.
Message: Indicates that you have received a new message.
In Call/Call Forward: Indicates that you are on a call or forwarding a call.
Network Encryption: Indicates that you are connected to an access point that has encryption
enabled.
SIP Registered/Not Registered: Indicates the status of the IP Phone's connection to a SIP server.
Ring Mode (Silent/Ring/Vibrate/Ring+Vibrate): Indicates the ring mode that's currently enabled.
Alarm: Indicates that the alarm you set is going off.
Battery Level: Indicates the amount of battery power you have remaining.
You can also display a summary of the phone's current status by pressing the Status Soft Key.

Chapter 4: Configuring the Wireless-G IP Phone

Status Information
Wireless-G IP Phone
23