Korg KRONOS SGX-2 Parameter Manual page 807

Default CC assignments
As shipped from the factory, for simplicity, all KARMA and
Pad assignments are set to Off. However, the KRONOS has
a set of recommended CC assignments which can be loaded
in a single step. To do so:
1. Select the menu command Reset Controller MIDI
Assign.
A dialog box will appear.
2. Set the To menu to CC Default.
3. Press OK.
The controls for KARMA, the pads, and the Vector Joystick
will all be set to their recommended CC assignments. For
more information, see "Reset Controller MIDI Assign" on
page 822.
If you prefer, you may also manually assign the controls to
any other CCs. Make sure to write the Global settings in
order to preserve your edits!
KARMA ON/OFF
This assigns a control change message to the KARMA
ON/OFF switch. When assigned to a CC, the default is
CC#14.
KARMA SCENE
This assigns a control change message to the KARMA
SCENE switch. When assigned to a CC, the default is
CC#30. CC values of 0...7 select Scenes 1...8; other values
are ignored.
KARMA LATCH
This assigns a control change message to the KARMA
LATCH switch. When assigned to a CC, the default is
CC#31.
KARMA Sliders 1-8
These assign control change messages to each of the
KARMA CONTROL sliders. When assigned to CCs, the
defaults are CC#s 22...29.
KARMA Switches 1-8
These assign control change messages to each of the
KARMA SWITCHES. When assigned to CCs, the defaults
are CC#s 102...109.
2–1c: MIDI CC# Assign
—Vector Joystick / Pads
VJS X
VJS Y
These assign control change messages to the X-axis and Y-
axis of the Vector Joystick. When assigned to CCs, the
defaults are CC#s 118 (VJS X) and 119 (VJS Y).
For more information, see "1–1b: MIDI Routing Setup" on
page 784.
Important: If you set these to Off, the Vector Joystick
will truly be off; it will neither send MIDI, nor affect the
internal sounds.
[Off, MIDI CC#00...119]
[Off, MIDI CC#00...119]
[Off, MIDI CC#00...119]
[Off, MIDI CC#00...119]
[Off, MIDI CC#00...119]
[Off, MIDI CC#00...119]
[Off, MIDI CC#00...119]
Global P2: Controllers/Scales 2–1: Controllers
Pads 1-8
These assign note numbers or control change messages to
Pads 1–8. If received via MIDI In, or played on the Global
Channel from the local keyboard, these will trigger the pads.
When assigned to CCs, the defaults are CC#s 110...117. For
more information, see "Default CC assignments" on
page 793.
Optionally, the Pads can also transmit these messages
instead of their assigned chord notes. For more information,
see "Pads MIDI Out" on page 785.
v 2–1: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see "ENTER + 0-9: shortcuts for menu
commands" on page 153.
• 0: Write Global Setting. For more information, see
"Write Global Setting" on page 816.
• 1: Reset Controller MIDI Assign. For more
information, see "Reset Controller MIDI Assign" on
page 822.
[Off, Note C-1...G9,
MIDI CC#00...#119]
793