Table of Contents
Advertisement
If you check All Audio Tracks (when an Audio track is
selected), the data will be inserted into all audio tracks.
6. To execute the Repeat Measure command, press the
OK button. To cancel, press the Cancel button.
If you execute the Repe at Me asure operation on me asures 1–4 with "Time" = 2,
me asures 1–4 will be inserted into me asures 5–8.
Before
Repe at
Track 1
1
2
3
Me asure
After
Repe at
1
2
Track 1
3
Me asure
If you execute Repeat Measure at a location in the middle
of an audio event that spans several measures, a new
region will be automatically created and named.
Note: The WAVE file itself will not be modified.
Copy Measure
This command copies the measures of musical data specified
as the "From" source to the beginning of the measure
specified as the "To" location.
When you execute the Copy Measure command, the existing
track data at the copy destination will be rewritten.
1. Select the copy source song.
2. Select "Copy Measure" to open the dialog box.
MIDI tracks
Audio tracks
3. Use From: Track or "Audio Track" to select the copy-
source track.
(By default, this will be the Track Select track.)
If you execute with All Tracks, All MIDI Tracks, and
All Audio Tracks unchecked, only the selected track will
be copied. Note that the time signature and tempo will not
be copied.
If you check All Tracks, the playback data of all tracks
including the Master Track will be copied.
4
5
6
1
2
5
6
4
3
4
Sequencer: Page Menu Commands Copy Measure
If you check All MIDI Tracks (when a MIDI Track is
selected), all MIDI tracks will be copied.
If you check All Audio Tracks (when an Audio Track is
selected), all audio tracks will be copied.
4. In From Measure and To End of Measure, specify the
range of copy source measures.
By default, the range of measures will be set as specified
on the Track Edit page.
5. Use To: Song to select the copy-destination song, use
Track or "Audio Track" to select the copy-destination
track (if you haven't checked All Tracks, All MIDI
Tracks, or All Audio Tracks), and use Measure to
select the measure at which the copied data will be
inserted.
You can't copy between MIDI and audio.
6. To execute the Copy Measure operation, press the OK
button. To cancel, press the Cancel button.
Example: W hen you copy me asures 5–7 of track 1 to the third me asure of track 2,
me asures 3–5 of track 2 will be rewritten.
Track 1
1 (4 / 4)
2 (4 / 4)
3 (4 / 4)
(source)
Track 2
1 (4 / 4)
2 (4 / 4)
3 (4 / 4)
(destination)
If the copy-source you specify is a portion of an audio
event that spans several measures, or if the copy-
destination is a portion of an audio event that spans
several measures, a new region will automatically be
created and named when you execute the Copy Measure
command.
Note: The WAVE file itself will not be modified.
Move Measure
This command moves the specified measures to another
location. Existing data at the destination will be pushed back
to make room for the moved data, and the data surrounding
the old location will be moved to fill in the gap.
1. Select "Move Measure" to open the dialog box.
MIDI tracks
4 (3 / 4)
5 (3 / 4)
6 (3 / 4)
7 (4 / 4)
4 (3 / 4)
5 (3 / 4)
6 (3 / 4)
7 (4 / 4)
659
Advertisement
Table of Contents
