Korg KRONOS SGX-2 Parameter Manual page 798

Table of Contents

Advertisement

Global mode
MIDI Clock
MIDI Clock (MIDI Clock Source) [Internal, External
This controls whether the KRONOS uses the internal Tempo
setting, synchronizes to incoming MIDI Clocks from
external MIDI devices or USB (from a computer-based
sequencer, for instance), or automatically switches between
the two.
Tempo affects the internal sequencer, KARMA, step
sequencers, and tempo-sync'd Wave Sequences, LFOs, and
delay times.
Internal: The KRONOS will use the internal tempo setting,
as determined by the Tempo parameter, Tempo knob, and
Tap Tempo button.
Select Internal when using the KRONOS by itself, or when
you want the KRONOS to control the tempo of external
MIDI devices, such as a sequencer or drum machine.
External MIDI: The KRONOS tempo will synchronize to
incoming MIDI Clock messages.
Note: this setting relies on MIDI Clocks being received from
an external device, such as a sequencer or drum machine. If
MIDI Clocks are not being received, tempo-related features
will not function: KARMA will not play, Wave Sequences
will not move from step to step, etc.
External USB: The KRONOS tempo will synchronize to
incoming MIDI Clock messages from the USB B port. Use
this when connected to a computer via USB. As with
External MIDI, if clocks are not being received, tempo-
related features will not function.
Auto MIDI: This combines the functionality of Internal
and External MIDI, so that you don't have to manually
switch between the two:
• If MIDI Clocks are being received, they control the
KRONOS tempo.
• If MIDI Clocks are not being received, the KRONOS
uses its internal tempo instead.
Auto defaults to using the internal tempo, and then
automatically switches to external if MIDI Clock messages
are received. It will then switch back to internal tempo in the
following circumstances:
784
Controller MIDI CC Assign
(Global P2: 2–1c)
Pad1: MIDI CC#110
Pad2: MIDI CC#111
Pad3: MIDI CC#112
Pad4: MIDI CC#113
Pad5: MIDI CC#114
Pad6: MIDI CC#115
Pad7: MIDI CC#116
Pad8: MIDI CC#117
Pads Chord
(Program, Combination, Song)
PAD1
1: C3 / 127
2: C4 / 100
3: E4 / 102
4: G4 / 105
5: B4 / 064
6: Off
7: Off
8: Off
MIDI, External USB,
Auto MIDI, Auto USB]
CC#110
Pads MIDI Out
Pad CC/Note
C3, C4, E4, G4, B4
Chord Notes
Note On & Off
• If after receiving a MIDI Clock, Start, or Continue
message, no new MIDI Clock message is received within
500 ms.
• If you start the KRONOS's sequencer from the front
panel without having received a MIDI Clock, Start, or
Continue message.
Auto USB: This combines the functionality of Internal and
External USB, so that you don't have to manually switch
between the two. The other details are identical to Auto
MIDI, above.
Receive Ext. Realtime Commands
Off (unchecked): The KRONOS will not respond to most
MIDI Common and Realtime messages, including Song
Position Pointer, Start, Continue, and Stop. Song Select
messages will still be recognized, however.
Note: Use this setting if the above messages from an external
MIDI sequencer are unnecessarily resetting the KRONOS's
Song parameters.
On (checked): The above Common messages (including
Song Select) and Realtime messages will be received.
This parameter cannot be set if MIDI Clock is set to
Internal.
1–1b: MIDI Routing Setup
Vector MIDI Out
This setting specifies the MIDI output generated by vector
joystick operations or vector envelope.
Vector Joystick: When you move the vector joystick, the
two MIDI control change messages specified by VECTOR
"VJS X" and "VJS Y" (2–1c) will be transmitted. By
default, "VJS X" is CC#118 and "VJS Y" is CC#119.
Normally you will use the Vector Joystick setting. In this
case, the vector envelope will not generate MIDI output. Use
this setting if you want to control an external MIDI device
by moving the vector joystick, or to record vector joystick
movements on the internal sequencer or an external
sequencer.
Vector CC Control: The KRONOS will transmit the MIDI
control change messages specified by the Vector CC Control
"+X," "–X," "+Y," and "–Y" settings in each Program,
Pads
MIDI Output
[Off, On]
[Vector Joystick,
Vector CC Control]

Advertisement

Table of Contents
loading

Table of Contents