Table of Contents
Advertisement
KARMA GE guide
Note that you can use this with the 2: [TR] Tempo -
Relative Envelope Type (described above), so that it not
only has a range that is influenced by the tempo, but its
"Time Scale" is also influenced by the tempo.
Note Trigger
0: Off
1: On
Allows an envelope to be triggered with every single note.
When set to 0: Off, the envelope is triggered normally as
specified by the settings of the Envelope Trigger in the
Level Combinations
Sta/Att Level (Start/Attack Level)
Controls an Envelope's Start and Attack Levels at the same
time - both will be set to the same value.
Sta/Sus Level (Start/Sustain Level)
Controls an Envelope's Start and Sustain Levels at the same
time - both will be set to the same value.
Sta/Rel Level (Start/Release Level)
Controls an Envelope's Start and Release Levels at the same
time - both will be set to the same value.
Att/Sus Level (Attack/Sustain Level)
Controls an Envelope's Attack and Sustain Levels at the
same time - both will be set to the same value.
Att/Rel Level (Attack/Release Level)
Controls an Envelope's Attack and Release Levels at the
same time - both will be set to the same value.
Sus/Rel Level (Sustain/Release Level)
Controls an Envelope's Sustain and Release Levels at the
same time - both will be set to the same value.
Time Combinations
Att/Dec Time (Attack/Decay Time)
Controls an Envelope's Attack and Decay Times at the same
time - both will be set to the same value.
Att/Rel Time (Attack/Release Time)
Controls an Envelope's Attack and Release Times at the
same time - both will be set to the same value.
Dec/Rel Time (Decay/Release Time)
Controls an Envelope's Decay and Release Times at the
same time - both will be set to the same value.
All Times
Controls an Envelope's Attack, Decay and Release Times at
the same time - all will be set to the same value.
1082
KARMA Module parameters, Dynamic MIDI, and the
Envelope Triggering settings of the Phase Pattern. For more
information, see "Envelope1/Envelope2/Envelope3" on
page 115, and "Envelope Trigger" on page 122.
When set to 1: On, every single note that is generated will
[0, 1]
retrigger the selected envelope. For example, this can be
useful for adding Vibrato to individual notes (using an
envelope set to CC #01 (Mod Wheel)), or fading in/out
individual notes (using an envelope Type of CC #07
(Volume) or CC #11 (Expression)).
[0...99]
Sta/Att/Sus Level (Start/Attack/Sustain Level)
Controls an Envelope's Start, Attack and Sustain Levels at
[0...99]
the same time - all will be set to the same value.
Sta/Att/Rel Level (Start/Attack/Release Level)
[0...99]
Controls an Envelope's Start, Attack and Release Levels at
the same time - all will be set to the same value.
Sta/Sus/Rel Level (Start/Sustain/Release Level)
[0...99]
Controls an Envelope's Start, Sustain and Release Levels at
the same time - all will be set to the same value.
[0...99]
Att/Sus/Rel Level (Attack/Sustain/Release Level)
[0...99]
Controls an Envelope's Attack, Sustain and Release Levels
at the same time - all will be set to the same value.
All Levels
Controls an Envelope's Start, Attack, Sustain and Release
Levels at the same time - all will be set to the same value.
[0...99]
[0...99]
[0...99]
[0...99]
[0...99]
[0...99]
[0...99]
[0...99]
[0...99]
Advertisement
Table of Contents
