Table of Contents
Advertisement
Sequencer mode
Note: You can use the control surface to adjust the pan. You
can also make this setting from the front panel mixer section
or from the P0– Control Surface page of the LCD. The
procedure given below describes how to make these settings
from the front panel.
1. Press the CONTROL ASSIGN MIXER TIMBRE
/TRACK switch to select tracks 1–8 or 9–16.
2. If you want to control the pan, EQ, and effect send
levels of a single track, press the MIXER KNOBS
switch to select CHANNEL STRIP. Then press the
MIX SELECT 1/9–8/16 switch for the track you want
to control.
If you want to adjust the pan of tracks 1–8 or 9–16
together, press the MIXER KNOBS switch to select
INDIVIDUAL PAN.
3. If you've selected CHANNEL STRIP, use the MIX
CHANNEL STRIP Pan (knob 1) to adjust the pan.
If you've selected INDIVIDUAL PAN, use the MIX
CHANNEL STRIP knobs to adjust the pan of tracks 1–8
or 9–16.
You can adjust the knobs in a range of L001 to R127.
(You can't select RND.)
If Status (2–1a) is INT or BTH, CC#10 Pan can be
received to control the panning. When receiving CC#10,
a value of 0 or 1 is far left, 64 is center, and 127 is far
right. When you change the song or return to the
beginning of the song, tracks whose Status is EXT, EX2
or BTH will transmit the pan you specify here as a MIDI
message (except for RND).
Volume
This fader adjusts the volume of the MIDI Track. The meter
to the left of the fader displays its audio level in realtime,
showing the combined peak signals of the left and right
channels.
Note: You can use the control surface to adjust the volume.
You can also make this setting from the front panel mixer
section or from the P0– Control Surface page of the LCD.
The procedure given below describes how to make these
settings from the front panel.
1. Press the CONTROL ASSIGN MIXER TIMBRE
/TRACK switch to select tracks 1–8 or 9–16.
2. Use the MIX VOLUMES 1/9–8/16 sliders to adjust the
volume.
When Status (2–1a) is INT or BTH, CC#7 Volume can
be received to control the volume. The volume of a track
is determined by multiplying the MIDI Volume (CC#7)
and Expression (CC#11) values. When you change the
song or return to the beginning of the song, tracks whose
Status is EXT, EX2 or BTH will transmit the volume you
specify here as a MIDI Volume message.
Track 02...16 (Track Number)
For more information, please see "Track 01 (Track
Number)" on page 530.
v 0–1: Page Menu Commands
You can use a front-panel shortcut for menu items 0-9. For
more information on these shortcuts, see "ENTER + 0-9:
shortcuts for menu commands" on page 153.
532
• 0: Memory Status. For more information, see "Memory
Status" on page 637.
• 1: Exclusive Solo. For more information, see "Exclusive
Solo" on page 153.
• 2: Rename Song. For more information, see "Rename
Song" on page 637.
• 3: Initialize Song. For more information, see "Initialize
Song" on page 637.
• 4: Copy From Song. For more information, see "Copy
From Song" on page 637.
• 5: Load Template Song. For more information, see
"Load Template Song" on page 637.
• 6: Save Template Song. For more information, see
"Save Template Song" on page 638.
• 7: FF/REW Speed. For more information, see "FF/REW
Speed" on page 638
• 8: Set Location (for Locate Key.) For more information,
see "Set Location (for Locate Key)" on page 639.
• 9: GM Initialize. For more information, see "GM
Initialize" on page 639.
• 10: Copy From Combi. For more information, see
"Copy from Combi" on page 639.
• 11: Copy From Program. For more information, see
"Copy From Program" on page 639.
• 12: Auto HDR/Sampling Setup. For more information,
see "Auto HDR/Sampling Setup" on page 642.
• 13: Add to Set List. For more information, see "Add To
[000...127]
Set List" on page 154.
• 14: Edit Program. For more information, see "Edit
Program" on page 516.
• 15: Load required samples. For more information, see
"Load required samples" on page 154.
Advertisement
Table of Contents
